Free display tests that run in your browser. Nothing is uploaded.

Colour and tone

Screen brightness test

Fields for setting display brightness against the room you are actually in, and a straight answer about why no page can measure it.

Field

The field that tells you whether the screen is uncomfortable in this room.

How to run this test

  1. Set the room to the lighting you actually use. Brightness is a relationship between screen and room, not a property of the screen alone.
  2. Press Go full screen on Paper match and hold a sheet of white paper next to the screen.
  3. Adjust display brightness until the white on screen looks about as bright as the paper. For most desk work in a normally lit room that is the right neighbourhood.
  4. Switch to Step ladder and check both ends: the lowest steps should separate from black and the highest from white.
  5. Sit with it for a few minutes on Full white. If your eyes tighten or you want to look away, it is still too bright, whatever the paper said.

What a problem looks like

The screen is uncomfortable even at the lowest setting
Common on bright HDR-capable monitors and on some phones. Check for a separate backlight or panel-brightness control rather than the picture brightness, and check that any HDR mode is off for ordinary content. A dark room with a very bright floor is the usual complaint.
The lowest steps disappear as you raise brightness
Raising brightness lifts the black floor on an LCD, which reduces shadow separation. That is the trade you are making. Set brightness for comfort first, then check the shadow end and accept the best compromise.
Brightness changes on its own
Ambient light sensing, or an energy-saving mode reacting to content. On a laptop check adaptive brightness and the battery power mode; on a phone check auto-brightness. Turn both off before judging anything on this page.
The paper looks whiter than the screen at maximum
A dim panel, a very bright room, or both. Most laptop panels cannot compete with direct daylight. Moving away from the window will do more than any setting.
White looks tinted rather than neutral
That is white point rather than brightness, and the colour temperature test is the page for it. A blue-leaning white often reads as brighter than it is, which is why a cooler display can feel harsher at the same setting.

What to do next

Set brightness by comfort in your room, check that the shadow steps still separate, then leave it. If you change rooms or the light changes through the day, expect to change it again, which is what adaptive brightness is trying to do for you.

Questions people actually ask

Why does this not tell me my brightness in nits?

Because nits are a measurement of light leaving your panel, and a web page has no access to that. There is no browser API for luminance and no way to infer it. Any site that shows you a nit figure has either asked your display model or made it up.

What brightness should I actually use?

There is no single answer, because it depends on your room. The usual advice for office work in a normally lit room is to match a sheet of white paper held beside the screen, and for a dark room to go well below that. Comfort over a long session beats any number.

Does the brightness slider on this page change my display?

No page can change your display brightness. Nothing here adjusts your panel at all: these are fields at fixed values, and the adjusting happens in your display menu or your operating system settings.

Is lower brightness better for my eyes?

Up to a point. A screen much brighter than its surroundings is tiring, and so is a screen much dimmer, because your pupils keep adjusting. Matching the screen roughly to the room is the part that matters. Blue light is a separate question and a contested one.

Why does my screen look brighter after a few minutes?

Your eyes adapt. Dark adaptation takes several minutes and keeps going for far longer, which is why a screen that seemed fine when you sat down can feel harsh later in a dim room. Judge after your eyes have settled, not in the first ten seconds.