Free display tests that run in your browser. Nothing is uploaded.

By device

TV screen test

A television is judged from a sofa, not from arm's length, and its worst faults hide behind picture modes that are on by default. This is the order that finds them.

Last updated

Before you start

  • Get the page onto the television. A built-in browser works, and so does casting a laptop or plugging one in over HDMI. On a games console browser the arrow keys on the remote move between fields.
  • Switch the picture mode to Filmmaker, Cinema or Game, whichever your set offers. The default Vivid or Standard mode applies processing that will invent detail these patterns are trying to show you.
  • Turn off motion smoothing, dynamic contrast, noise reduction and any eco or ambient light sensor. Every one of them changes the picture while you are trying to judge it.
  • Label the HDMI input as PC or Computer if the option exists. That usually disables chroma subsampling and much of the processing chain.
  • Sit where you normally sit. A television judged from arm’s length looks broken; the same set from a sofa looks fine, and the sofa is the honest test.

The run, in order

  1. 01
    Dirty screen effect test

    The first thing to check on any television, because it is the fault people actually notice, on football pitches and panning shots, and the one that is hardest to unsee afterwards.

  2. 02
    Screen uniformity test

    Grey fields with a zone grid, so you can describe where the unevenness is rather than just that it exists. Useful evidence for a retailer.

  3. 03
    OLED burn-in test

    On an OLED set, check the news ticker and channel logo areas. On an LCD this is quick and usually clean, so it costs nothing to run.

  4. 04
    Black level test

    The PLUGE ladder tells you whether shadow detail is being crushed, which on a television is nearly always an RGB range mismatch between the source and the set.

  5. 05
    True black test

    In a dark room, this separates a panel that switches off from one blocking a backlight, and shows blooming around bright objects on a local-dimming set.

  6. 06
    Motion blur test

    Moving text at several speeds, which is where motion processing gives itself away. Run it with smoothing off, then on, so you can see what it is doing.

  7. 07
    Gray screen

    A flat grey field to finish on. Dust, mura and tint variation all show here and nowhere else, and it takes ten seconds.

What matters on this hardware

Dirty screen effect on panning shots

Uneven brightness that only shows on large flat moving areas. Sports coverage is where people notice it first. Every panel has some; the question is whether it is visible on content from your seat.

Crushed blacks from a range mismatch

A source sending limited range to a set expecting full, or the reverse. Shadow detail disappears or blacks look grey. It is free to fix in a menu and it is the most common television picture fault there is.

Motion smoothing

Interpolation invents frames between real ones. It makes film look like video and adds lag. Every set has it on by default under some cheerful name, and turning it off is the single biggest improvement most people can make.

Blooming around bright objects

On a local-dimming LCD, a bright object on black lights up its whole dimming zone. Subtitles on a dark scene are where you see it. The number of zones decides how large the halo is.

Burn-in on an OLED television

Channel logos, news tickers and game heads-up displays sit still for hours. Modern sets shift pixels and run compensation cycles, which helps and does not make it impossible.

Chroma subsampling on a PC input

If text from a computer has coloured fringes, the set is subsampling colour. Labelling the input as PC usually fixes it, and if it does not, a lower refresh rate or colour depth often will.

Questions people actually ask

How do I run these tests on a television?

Use the built-in browser if the set has one, cast from a laptop or phone, or plug a computer in over HDMI. A games console browser works too. On a remote, the arrow keys step through fields once a test is in full screen, which is why every tool here responds to them.

Which picture mode should I use for testing?

Filmmaker Mode if the set has it, otherwise Cinema or Movie, otherwise Game. What you are looking for is the mode that applies the least processing. Vivid and Standard both add sharpening, contrast and motion handling that will interfere with every pattern here.

My television looks worse than the shop model. Why?

Shop demonstration modes run at maximum brightness, maximum sharpness and maximum colour, which looks striking under shop lighting and wrong at home. The set in your living room is probably more accurate. That is uncomfortable to accept and usually true.

Is dirty screen effect worth returning a television over?

If it is visible from your seat on content you actually watch, yes, while you still can. There is no industry threshold to point at, which means no retailer can tell you it is within specification either. Photograph it on a grey field as evidence.

Should I worry about burn-in on an OLED television?

For mixed viewing, not much. For many hours a day of the same channel with a fixed logo, or a games console with a static heads-up display, the risk is real. Modern sets shift pixels and run compensation cycles automatically, and varied content is still the best protection.