By device
Phone screen test
A phone fails differently from a monitor: burn-in on an OLED, touch dead zones after a repair, and a tint that only appears in the dark. This is the order that finds them.
Last updated
Before you start
- Turn off automatic brightness. A phone that keeps adjusting itself while you look at a test field makes every judgement useless.
- Turn off night mode, reading mode, and any adaptive colour setting. All three change the white point, which is the thing several of these tests are about.
- Clean the glass properly. Fingerprints and skin oil are the most common false positives on a phone by a wide margin.
- Add this page to your home screen if you want the full screen without browser bars, or rotate once and scroll, which hides them on most phones.
- Find a genuinely dark room for the black tests. On an OLED phone this is the difference between a useful result and a pointless one.
The run, in order
- 01 Dead pixel test
Nine fields. Phone panels have very high pixel density, so a single dead pixel is hard to see and worth looking for carefully at arm’s length rather than up close.
- 02 OLED burn-in test
The most likely real fault on a phone more than a year old. Status bar, navigation bar and keyboard outlines are the usual places, and a flat colour field is where they show.
- 03 True black test
In a dark room this tells you whether you are looking at an emissive panel behaving properly, and shows up near-black uniformity, which is the current weak point of phone OLEDs.
- 04 Multi touch test
How many fingers the digitiser tracks at once, and whether each is followed independently. A phone that drops contacts is a phone that will fail you in a game.
- 05 Touch screen test
The grid, for dead zones, and drawing, for drift and broken strokes. This is the one to run after a screen replacement or a drop.
- 06 Screen uniformity test
Grey fields at several levels. Phone panels are small enough that unevenness is easy to miss and easy to confirm once you know where to look.
- 07 PWM flicker test
Most OLED phones dim by pulsing. If your eyes tire on a phone and not on a laptop, this is the first thing to check.
What matters on this hardware
Burn-in at the status bar
The clock, the battery icon and the notification area sit in the same pixels for years. On an OLED they wear faster than their surroundings, which shows as a faint permanent ghost on a mid-grey field.
Green or pink tint at low brightness
Common on OLED phones, where the three emitters do not dim at exactly the same rate. It is a panel characteristic rather than damage, and it is more visible in a dark room than anywhere else.
Touch dead zones after a repair
A replacement digitiser that is slightly misaligned or poorly seated loses contact in strips, usually near an edge. The grid in the touch screen test maps this in under a minute.
Pulse-width modulation flicker
Most OLED phones pulse the emitters to dim, often at a few hundred hertz. Some offer high-frequency dimming in the display settings. If phones give you headaches and laptops do not, look here.
Rounded corners and cutouts
The advertised diagonal usually includes corners the display does not actually use, and a camera cutout removes more. Neither is a fault and both make a measured diagonal disagree with the box.
Refresh rate that changes on its own
Adaptive refresh rate drops a 120 Hz phone to 60 Hz or lower on static content to save battery. Measuring while nothing is moving gives you the low figure, which is why the refresh rate test asks you to keep moving.
Questions people actually ask
Can I test a phone screen without installing an app?
Yes. Everything here runs in the browser you already have, and nothing you do is sent anywhere. After the first visit it keeps working with no network connection at all, which is useful when you are checking a second-hand phone in a car park.
How do I tell burn-in from temporary image retention?
Time. Retention fades after the panel has shown other content for a few minutes; burn-in does not. Run the burn-in fixer for ten minutes and check again. If the ghost is still there, it is permanent, and nothing available to you will reverse it.
My phone screen has a green tint in the dark. Is it broken?
Probably not. Low-brightness tint is a known OLED characteristic caused by the three emitter types dimming at slightly different rates. It is worth raising with a retailer if it is severe and visible at normal brightness, and it is normal if it only appears near the bottom of the range in a dark room.
Is it worth testing a second-hand phone before buying?
Very much so. Burn-in, touch dead zones and a replacement panel with poor colour are the three things that are expensive to discover later and quick to find here. There is no return window on a private sale, which is exactly why the checks matter more.
Why does the gamma test refuse to run on my phone?
Because most phones have a device pixel ratio that is not a whole number, such as 2.625 or 2.75. The single-pixel line pattern it depends on gets resampled at those ratios, so the test says it cannot measure rather than showing you a wrong answer. The greyscale and near-black tests work at any ratio.