Guides
Guides
13 explanations of the things people ask about before or after running a test. Every one of them says what a browser can check and what it cannot.
Last updated
- Dead pixel or stuck pixel, and how to tell One is sometimes fixable and one never is. Telling them apart takes a minute.
- Backlight bleed, IPS glow and clouding Three things that look alike on black. Only one of them is a fault.
- Limited and full RGB range, and why blacks look grey The most common picture fault there is, and it costs nothing to fix.
- What to check on a new monitor, in order Twenty minutes of checks, in the order that finds problems fastest.
- Refresh rate, frame rate and what each one does What the Hz number means, and where the returns start to shrink.
- Response time, overdrive and what actually causes blur Why most motion blur is not the pixels, and how to tune overdrive.
- OLED and LCD, and which faults belong to each Different technologies fail differently. Knowing which is which saves a return.
- Reducing the risk of OLED burn-in Uneven wear, not a stuck image. What actually reduces the risk.
- How far you can calibrate a display by eye What patterns can set, what needs an instrument, and the right order.
- Checking a second-hand display before you buy No return window means marginal results matter. Ten minutes of checks.
- HDR, and why enabling it sometimes looks worse Supporting HDR and doing it well are different things.
- The display settings that actually matter for games Which settings change how a game feels, and which are marketing.
- Keeping a phone screen healthy A few habits that matter, and what to check after a screen repair.
By device
The same tools in a different order, with the faults that only matter on one kind of hardware.
- Laptop screen test Pressure marks, lid flex and a refresh rate that changes on battery.
- Phone screen test Burn-in, touch dead zones and tint that only shows in the dark.
- TV screen test Dirty screen effect, crushed blacks and the processing that hides them.
- Gaming monitor test Refresh rate you actually get, frame pacing and overdrive tuning.
- Tablet screen test Stylus tracking, burn-in by orientation and pressure marks from covers.
- Ultrawide monitor test Uniformity across a very wide panel, curvature and mismatched content.
- Projector test Focus at the corners, geometry, and why the room sets the black level.
- OLED screen test Burn-in, near-black uniformity, pulse dimming and low-brightness tint.
- LCD screen test Bleed against glow, the black floor, VA smearing and dimming halos.