Free display tests that run in your browser. Nothing is uploaded.

By device

Laptop screen test

A laptop panel fails in ways a desktop monitor does not: pressure marks from the keyboard, lid flex, and a refresh rate that changes when you unplug it. This is the order to check them in.

Last updated

Before you start

  • Plug the laptop in. Many panels drop to a lower refresh rate and a dimmer backlight on battery, and you want to know both states rather than an average of them.
  • Turn off adaptive or automatic brightness, and any night-light or warm-mode filter. Both change what you are looking at while you look at it.
  • Set display scaling to 100 or 200 per cent if you want the pixel-exact tests to run. At 125 or 150 per cent they will refuse rather than give you a wrong answer.
  • Clean the screen with a dry microfibre cloth. Dust on a laptop lid is the single most common false dead pixel.
  • Open the lid to the angle you actually use. Laptop panels change more with viewing angle than desktop monitors do, and judging one from the wrong angle is a waste of time.

The run, in order

  1. 01
    Dead pixel test

    Nine fields, starting with white. Laptop panels are handled more than any other kind of screen, so this is where pressure marks and dead sub-pixels turn up.

  2. 02
    Backlight bleed test

    Thin laptop lids flex, and flex shows up as bleed and clouding at the edges. Check with the lid at your normal angle and then at a couple of others.

  3. 03
    Screen uniformity test

    Grey fields across the panel. Edge-lit laptop backlights are rarely even, and this tells you how uneven yours is before it starts bothering you in a document.

  4. 04
    Refresh rate test

    Measure it plugged in, then unplug and measure again. A 120 Hz laptop that quietly runs at 60 Hz on battery is behaving as designed, and you should know which mode you are in.

  5. 05
    Colour temperature test

    Laptop panels drift warm with age and many ship cool. This tells you which direction yours sits, and whether a night filter has been left on.

  6. 06
    Screen resolution test

    Confirm the panel is running at its native resolution and what scaling is doing to it. A scaled signal is the most common reason a good laptop screen looks soft.

  7. 07
    PWM flicker test

    Laptop backlights often use pulse-width modulation at low brightness. If long sessions tire your eyes, this is worth five minutes.

What matters on this hardware

Refresh rate on battery

Power settings on both Windows and macOS drop the refresh rate to save battery, often without telling you. If motion feels different unplugged, that is why, and it is usually a setting rather than a fault.

Pressure marks from the keyboard

A closed lid presses the keys against the panel. The result is faint bright or dark patches in a row, visible on grey and on dark fields. It is damage rather than a manufacturing fault, and it does not improve.

Viewing angle on a TN panel

Cheaper laptops still ship TN panels, where colour and gamma shift strongly with angle. If the top of the screen looks washed out and the bottom looks dark, that is the panel type, not a setting.

Backlight bleed from lid flex

Picking a laptop up by one corner twists the lid. Bleed that appears only when the machine is held a certain way is the chassis, and tightening a loose hinge sometimes helps.

Glossy versus matte

A glossy panel shows better black and worse reflections; a matte one does the opposite. Neither is a fault. Judge black level with the room light behind you rather than in front.

Scaling softness

High-resolution laptop panels are almost always scaled. At a whole-number factor text stays crisp; at 125 or 150 per cent it softens. That softness is the operating system, not the panel.

Questions people actually ask

How many dead pixels are acceptable on a new laptop?

It depends entirely on the manufacturer policy, which is usually written in terms of how many pixels of each type are allowed in each screen zone. Check the policy for your specific model rather than trusting a general figure, and photograph anything you find while the return window is open.

Why does my laptop screen look worse on battery?

Because it probably is. Battery power modes lower brightness, reduce refresh rate, and on some machines change the colour profile. Plug it in, check the same tests again, and compare. If the difference disappears, it is power management working as designed.

Is backlight bleed on a laptop normal?

Some is normal on every edge-lit panel, and laptop lids are thin enough that a little flex is unavoidable. What is not normal is bleed severe enough to see on dark content at normal brightness in a normally lit room. That is worth returning.

My laptop screen has a dead pixel. Can it be fixed?

A dead pixel, no. A stuck one, sometimes: rapid colour cycling frees a proportion of them and cannot hurt the panel. Run the stuck pixel fixer for twenty minutes before deciding, and remember the difference: dead shows black on every field, stuck shows a fixed colour.

Should I test an external monitor the same way?

Mostly yes, but the order changes. On an external display, uniformity and bleed matter more and battery behaviour does not exist. The guided monitor test is the better starting point for anything that plugs in.