Free display tests that run in your browser. Nothing is uploaded.

By device

OLED screen test

An emissive panel has no backlight to leak and a different set of weaknesses instead: uneven wear, near-black uniformity and how it dims.

Last updated

Before you start

  • Find a properly dark room. An OLED is bought for its black, and black is the one thing a lit room takes away from you entirely.
  • Let your eyes adapt for at least two minutes before judging anything near black. Dark adaptation is slow and this run depends on it.
  • Turn off any adaptive brightness and any ambient colour setting. An OLED that dims itself mid-test makes every judgement worthless.
  • Let the panel run for twenty minutes so it has finished any compensation cycle it wanted to run at power-on.
  • Note your brightness setting before you start. Several of these checks behave differently at the top and bottom of the range, and you want to know which you are looking at.

The run, in order

  1. 01
    True black test

    Start here, because it is the whole reason for the technology. In a dark room the panel should disappear, and the first code values above black should still be visible.

  2. 02
    OLED burn-in test

    The fault that cannot be undone. Flat fields at several levels, looking for taskbars, logos, status bars and game interface outlines.

  3. 03
    Screen uniformity test

    Near-black uniformity is the current weak point of OLED panels, and it is the thing most likely to be visible on real content after burn-in.

  4. 04
    PWM flicker test

    Most OLED panels dim by pulsing rather than by lowering power. If screens tire your eyes, this is where the explanation usually is.

  5. 05
    Colour temperature test

    OLED emitters age at different rates, so white point drifts over the life of the panel. This shows where yours sits now.

  6. 06
    Pink screen

    A light tint at the lowest brightness setting, which is where the green or magenta shift that OLED panels are known for becomes obvious.

  7. 07
    Response time test

    OLED pixel transitions are very fast, so what you see here is mostly hold-type blur. Worth running to know what your panel actually looks like in motion.

  8. 08
    Gradient test

    Near-black banding, which OLED panels handle differently from LCDs and which shows most in the darkest quarter of the ramp.

What matters on this hardware

Burn-in from static elements

Taskbars, channel logos, news tickers and game heads-up displays sit in the same pixels for hours. Those pixels dim faster than their neighbours and the pattern becomes permanent. Varied content is the only real protection.

Near-black uniformity

Faint blotches and vertical banding in the darkest few per cent are common and vary between units. They are invisible in a lit room and obvious on a dark scene in a dark one, which is exactly where an OLED is supposed to shine.

Automatic brightness limiting

An OLED reduces output when a large part of the screen is bright, to control power and heat. A white window that dims as it grows is the panel protecting itself, not a fault, and it is why full-screen white is where OLED brightness looks weakest.

Pulse-width dimming

Most OLED panels dim by switching the emitters on and off quickly rather than driving them more gently. Some offer a high-frequency or DC dimming option. It is worth finding if long sessions leave your eyes tired.

Tint at the bottom of the range

Green or magenta casts at very low brightness come from the three emitter types dimming at slightly different rates. Normal on current panels, more visible in a dark room, and not something a setting corrects.

Black crush on some panels

Shadow detail collapsing into black just above zero, which is a different fault from good black. The near-black ladder separates the two: a panel with real black still shows codes 1 and 2 as distinct.

Questions people actually ask

Can this page confirm my display is OLED?

No. Panel technology is not exposed to the web at all. A black that vanishes into a dark room with no halo around bright objects is strong evidence of an emissive panel, and that is an inference rather than a detection. The specification sheet is the reliable source.

How worried should I be about burn-in?

For mixed viewing, not very. For many hours a day of the same static interface, it is a real risk. Lower brightness, hidden taskbars and varied content all help, and modern panels shift pixels and run compensation cycles automatically. None of that makes it impossible.

My OLED looks dimmer than my LCD on white. Is something wrong?

Probably not. Automatic brightness limiting reduces output when most of the screen is bright, which is a deliberate protection. An OLED usually wins on a small bright highlight against a dark background and loses on a full-screen white field.

Is QD-OLED different from WOLED for these checks?

The run is the same and two results differ in practice. QD-OLED panels often show a lifted, slightly purple black in a lit room because ambient light excites the quantum dot layer, and WOLED panels tend towards a different near-black uniformity pattern. Both are panel characteristics rather than faults.

What should I do if I find burn-in?

Confirm it is permanent first: show varied content for ten minutes and look again on a flat grey field. If it has gone it was temporary retention, which means nothing. If it is still there, check whether your warranty covers it, because many classify it as wear rather than a defect.