Free display tests that run in your browser. Nothing is uploaded.

Colour and tone

Gradient banding test

Exact gradients, drawn one column at a time so nothing smooths them on the way to your screen.

Gradient
Continuous
Black to white. The one that shows banding most clearly.

How to run this test

  1. Press Go full screen. A gradient across a whole panel shows steps that a small window hides.
  2. Look across the greyscale ramp first, and look for vertical edges rather than a smooth wash.
  3. Step through the three channels. Blue usually shows the most banding and green the least, which is a property of how the panel and the signal chain handle each channel.
  4. Switch the step count on and off. A deliberately stepped ramp gives you a reference for what real banding looks like next to the smooth one.
  5. Turn dithering on. If the banding disappears, you have just seen the trick that panel makers and graphics drivers use to hide it.

What a problem looks like

Clear vertical bands across a smooth ramp
Banding. Somewhere between the page and the panel the range is being reduced to fewer levels than the ramp asks for. Common causes are an 8-bit signal being stretched, a limited-range setting, a graphics driver colour setting, or a panel that is genuinely coarse.
Banding only in the darkest quarter
Very common and usually the panel rather than the signal. Most displays have fewer usable steps near black, which is also where your eye is most sensitive to them. The near-black ladder is the better tool for judging how far down the useful range goes.
Bands that crawl or shimmer
Temporal dithering, usually frame rate control on an 8-bit panel pretending to be 10-bit. It is a normal technique rather than a fault. It also means no bit-depth conclusion can be drawn from what you are looking at.
Banding in one channel only
Points at the signal chain rather than the panel. Check the cable, the colour format setting, and whether the display is running in a limited or full range mode that disagrees with the source.
The whole ramp looks flat at one end
Clipping rather than banding. The ends of the range are being crushed together, so detail near black or near white disappears entirely. The black level and greyscale tests separate that from banding properly.

What to do next

If banding survives a different cable, a full-range colour setting and a different source, it is the panel. That is worth knowing before a return, and it is not something a browser can put a number on.

Questions people actually ask

Why does this use a canvas rather than a CSS gradient?

Because browsers are allowed to dither CSS gradients, and several do. Dithering is exactly what hides banding, so a CSS gradient would smooth over the thing the test exists to reveal. Here every column is filled at an explicit code value, so what reaches your panel is what the ramp asked for.

Does banding mean my panel is 6-bit or 8-bit?

No, and any tool that tells you otherwise is guessing. GPU dithering, driver settings, colour management and frame rate control all sit between the page and the panel, and frame rate control is invisible to software. Banding tells you the chain is losing levels somewhere; it does not tell you where.

What is the dithering switch for?

It applies an ordered dither to the ramp, which trades a fine noise pattern for smoother-looking steps. Turning it on and off shows you the same signal with and without the trick, which is useful for understanding what your display might already be doing without telling you.

My phone shows no banding at all. Is that real?

Often yes. Recent phone panels and their pipelines are genuinely good at this, and many apply temporal dithering by default. It is also harder to see banding on a small bright screen held close, so take a clean result on a phone as good news rather than proof.

Should I try to fix banding?

Check the cheap causes first: cable, colour format, and any RGB range mismatch between source and display. If it survives all of those it is the panel, and no setting will add levels it does not have. Some drivers offer a dithering option, which hides it rather than fixing it.