Free display tests that run in your browser. Nothing is uploaded.

Colour and tone

Colour gamut test

Swatch pairs that look identical on an sRGB screen and split apart on a wide-gamut one, plus what your browser actually reports.

sRGB
P3
Green 117 of 255 steps apart on a P3 display
sRGB
P3
Red 51 of 255 steps apart on a P3 display
sRGB
P3
Blue 10 of 255 steps apart on a P3 display Too close to judge by eye. The two blue primaries nearly coincide, so this pair stays near-identical even on a display that fully covers P3.
Display gamut, reported
Checking…
Wide-gamut colour syntax
Checking…
Dynamic range
Checking…

The first row is the bucket your display claims through the browser. The second is whether this browser understands wide-gamut colour syntax at all, which is a support check rather than a measurement. Neither row can be read back off the panel, so the swatches above are the part that tells you what actually reaches your eyes.

How to run this test

  1. Look at each swatch pair below. Each one is a Display P3 primary beside the closest sRGB colour to it.
  2. If you can see a seam between the two halves, your display and your browser are both painting outside sRGB.
  3. Start with green. It separates by about 117 steps out of 255, which is the largest gap of the three and the easiest to see.
  4. Ignore blue if it looks identical. The sRGB and P3 blue primaries sit almost on top of each other, so that pair separates by around 10 steps even on a perfect P3 panel.
  5. Compare with the reported capability underneath. A browser can understand wide-gamut colour and still be driving an sRGB panel, so the swatches are the part that settles it.

What a problem looks like

Every pair looks identical
Either the display covers sRGB only, or the browser is clamping wide colour on the way to it. The rows underneath narrow it down: if the display bucket says sRGB, that is your answer, and if it says P3 while the swatches stay flat, the clamp is happening somewhere between the page and the panel.
Green and red separate, blue does not
That is the expected result on a P3 display and not a fault. The blue primaries of sRGB and Display P3 are almost the same colour, so there is very little room between them to see. Judge your panel on green and red.
The browser claims P3 but colours look flat
Wide-gamut capability is not the same as wide-gamut content. Almost everything on the web is authored in sRGB, and a well-behaved display shows it in sRGB rather than stretching it. A screen that makes ordinary photos look lurid is usually failing to colour-manage, not succeeding at P3.
The result changes between browsers on the same screen
That is the rendering path changing, not the panel. Colour management differs between engines and between operating systems, and some browsers only paint wide gamut in certain contexts. The display capability row should stay the same across all of them.

What to do next

If the swatches separate, your display is showing colours outside sRGB and colour-managed applications can use them. If they do not, that is the panel, and no setting will add gamut it does not have. Either way, no coverage percentage can come from a web page.

Questions people actually ask

What is a colour gamut?

The set of colours a display can actually produce. sRGB is the long-standing web standard and the smallest of the common ones. Display P3 is wider, mostly in greens and reds, and is what most recent phones, laptops and better monitors ship with. Rec.2020 is wider still and no consumer display covers it fully.

Why can this page not tell me my coverage percentage?

Because a percentage is a measurement of light leaving your panel, and that needs a colorimeter pointed at the screen. A browser can ask the operating system which bucket your display falls into, and that is a capability report, not a coverage figure. Any site quoting you a percentage from a web page has invented it.

How do the hidden swatches work?

Each pair puts a Display P3 primary next to the colour an sRGB display would fall back to for it. On an sRGB display the browser clamps the wide colour to that fallback, so both halves paint exactly the same pixels and the seam disappears. On a P3 display the clamp does not happen and the two halves differ.

Is a wider gamut always better?

Only if the content and the colour management keep up. A wide-gamut panel showing sRGB content without management oversaturates everything, which looks striking at first and is wrong. For photo and video work a wide gamut with a proper profile is genuinely useful. For general use a well-behaved sRGB panel beats a badly managed P3 one.

What does the Rec.2020 row mean?

It means your browser reports that the display covers Rec.2020, which in practice is rare and often optimistic. The media query has only three buckets and reports the widest one it believes is met, so a display close to P3 with wide primaries can end up in the top bucket without covering it. Treat it as a claim, not a coverage figure.