Free display tests that run in your browser. Nothing is uploaded.

Colour and tone

Colour depth test

Patches one code value apart across the range, so you can see which steps survive the trip to your panel.

Deep shadow · 16 and 17
Shadow · 48 and 49
Lower midtone · 96 and 97
Midtone · 128 and 129
Upper midtone · 176 and 177
Highlight · 220 and 221
Near white · 250 and 251
View
1 code value

A step of one is the smallest an 8-bit signal can make. If nothing separates at one and everything separates at four, the limit was your eyes rather than the display.

How to run this test

  1. Press Go full screen. Small patches in a window are much harder to judge than large ones.
  2. Look at each pair. The two halves are one code value apart, which is the smallest step an 8-bit signal can make.
  3. Note which pairs you can separate. A display resolving most of them across the range is doing well.
  4. Switch to Fine ramp and look for flat plateaus rather than a smooth climb. A plateau is two or more code values arriving as the same shade.
  5. Change the step size if nothing separates. Two or four steps apart is a fair check of whether the panel is losing levels or your eyes simply cannot see one step.

What a problem looks like

No pair separates anywhere
Either the step really is too small for your eyes at this size and distance, which is common and normal, or levels are being lost in the chain. Raise the step size to two or four. If those separate cleanly, your eyes were the limit, not the panel.
Shadow pairs merge, highlight pairs separate
Typical. Most displays have fewer usable levels near black, and shadow detail is also where gamma and black level settings do the most damage. Check the black level test before concluding anything about the panel.
The fine ramp has visible plateaus
Levels are being collapsed somewhere between the page and the panel. Common causes are a limited-range signal being expanded, a driver colour setting, or a genuinely coarse panel. The gradient test covers this at full-screen scale.
The patches shimmer or crawl
Temporal dithering, usually frame rate control. The panel alternates between two levels quickly to simulate an intermediate one. It is a normal technique and it is also the reason no bit-depth conclusion can be drawn from what you are seeing.
A pair separates in one screen area and not another
Panel uniformity rather than depth. The same code value is not being rendered identically across the panel. The uniformity and dirty screen effect tests are the right pages for that.

What to do next

If steps are missing in a pattern, check the source colour format and any RGB range setting first, then the cable. If they survive everywhere, your chain is carrying the levels it was given, which is all this can tell you.

Questions people actually ask

Can this tell me if my panel is 8-bit or 10-bit?

No, and neither can anything else in a browser. The chain between this page and your panel includes graphics driver dithering, colour management and sometimes frame rate control, which makes an 8-bit panel behave like a 10-bit one and is invisible to software. What you can see here is whether levels survive, not how many the panel has.

What does the colour depth my browser reports mean?

Almost nothing. Browsers report 24 for practically every display, because it describes the colour buffer the page is drawing into rather than the panel receiving it. A 10-bit panel and a 6-bit panel both report 24. This is why the figure does not appear on this page.

Why show pairs rather than a gradient?

A gradient shows you where banding is, and a pair tells you whether one specific step survives. Both are useful and they answer different questions, which is why the gradient test exists separately. Pairs are also far less sensitive to the size of the window you are looking at.

Is more bit depth worth paying for?

For photo and video work with wide-gamut content, yes, because the same range is spread over more steps and banding becomes less likely. For ordinary use the difference is small and is often invisible next to how well the panel is calibrated. A well-tuned 8-bit panel beats a poorly tuned 10-bit one.

My phone separates every pair. Is that real?

Probably, up to a point. Recent phone panels and their pipelines handle fine steps well, and most apply temporal dithering by default. It is also easier to see fine steps on a small bright screen held close, so treat a clean result as good news rather than as proof of depth.