Free display tests that run in your browser. Nothing is uploaded.

OLED, burn-in and uniformity

True black test

Pure black beside the first code values above it, which is the pattern that separates a panel that switches off from one that blocks a light.

0
1
2
3
4
6
8
View

Codes 0 to 8 on black. Count how many you can see.

How to run this test

  1. Make the room properly dark. This is the one test that genuinely needs it, and any light in the room will defeat it.
  2. Let your eyes adapt for at least two minutes. Dark adaptation is slow and this test depends on it entirely.
  3. Press Go full screen on the patches and count how many you can separate from the background.
  4. Switch to Pure black and look at the panel as a whole. An emissive panel disappears into the room. A backlit one shows a faint grey rectangle.
  5. Switch to Black window and look for a glow around the black square. That is blooming, and it tells you the backlight is not off where the image is.

What a problem looks like

The panel is a visible grey rectangle on pure black
A backlight that stays on. Every LCD does this to some degree and it is the single largest difference between LCD and OLED in a dark room. Lowering brightness lowers the floor with it, which is why dark-room viewing usually wants a lower setting.
You cannot see code 1 or 2
Either the black floor is high enough to swallow them, which is the LCD case, or the signal is being clipped below a threshold. Check the RGB range setting on both source and display before deciding it is the panel.
A glow around the black window
Blooming from local dimming. The backlight zone covering the black square is not fully off because it also covers some of the white. The size of the glow is a rough guide to how large the zones are. An emissive panel shows none.
Patchy brightness across the black field
Clouding on an LCD, or near-black uniformity on an OLED. Both are common. The backlight bleed test is the better page for the LCD case, and the uniformity test for describing where it is.
The screen looks black until you move your head
IPS glow, which is light from the panel structure changing with angle rather than light leaking at the edges. It is inherent to the technology and not a fault. Light that stays put when you move is bleed; light that follows you is glow.

What to do next

If black looks grey in a dark room and that bothers you, the fix is a different panel technology rather than a setting. Lowering brightness lowers the floor and the whole picture with it, which is the compromise every backlit display asks you to make.

Questions people actually ask

What is true black?

A pixel that emits no light at all. An OLED or micro-LED pixel switches off, so black is the same as the screen being off. An LCD makes black by blocking a backlight that is still on, which it can never do perfectly, so LCD black is always some amount of grey.

Can this page tell me whether I have an OLED?

No. Panel technology is not exposed to the web at all. What you get is a strong hint: if pure black is indistinguishable from the screen being off in a dark room, you are almost certainly looking at an emissive panel. That is a good inference rather than a detection, and a very good VA panel in a dark room can be confusing.

Why does the room have to be dark?

Because the thing you are judging is a tiny amount of light. Any room light reflects off the screen surface and swamps it, which is also why a matte panel in a bright room looks like it has a fine black regardless of its actual floor.

Is a higher black level always worse?

In a dark room, yes, and it is the difference people notice most. In a bright room it barely matters, because reflections raise the effective black far above the panel floor. Judge black in the room you actually watch in.

My OLED shows faint blotches on near-black. Is that a fault?

Near-black uniformity is the weak point of current OLED panels and some variation is normal. It is worth checking against the uniformity test and worth acting on inside a return window if it is obvious on content rather than only on a test pattern.