Blooming test
Bright shapes on an exact black field, which is the pattern that makes a zoned backlight show its edges.
Subtitles look like this to a dimming algorithm
Esc to exit · arrow keys change the shape · H hides the controls
The hardest case. A small bright point on black is where a coarse backlight gives itself away.
How to run this test
- Make the room dark. Blooming is a small amount of stray light and any room light hides it entirely.
- Let your eyes adapt for two minutes, then press Go full screen on the small dot.
- Look at the area around the bright shape rather than the shape itself. A glow that fades outwards is blooming.
- Step through the shapes. A halo that grows with the object is normal optics; a halo that stays the same size regardless is the dimming zone.
- Try the four corners last. If the whole screen lifts when four small points are lit, the backlight is dimming globally rather than by zone.
What a problem looks like
- A soft glow around every bright object
- Blooming from a backlight that cannot switch off exactly where the image is dark. Every backlit display does this to some degree, and the size of the glow tells you roughly how large the dimming areas are.
- The halo is the same size whatever the object
- That is the dimming zone rather than the optics. A zone is lit because part of it contains something bright, and the rest of the zone lights with it. Smaller halos mean more zones.
- The whole screen brightens when anything is lit
- Global dimming rather than local. The backlight has one level for the whole panel, so any bright content raises the black everywhere. This is normal on displays without local dimming and is worth knowing before you believe a marketing claim.
- The bright object dims when it is small
- Some displays reduce output for small bright areas to control blooming, which trades highlight punch for a cleaner black. It is a deliberate choice in the panel firmware and not a fault.
- No halo at all
- Either an emissive panel, where each pixel controls its own light, or a display with no backlight lit near the object. On an OLED this is the expected result and the reason people buy them.
What to do next
If the halos bother you, try turning local dimming down a step rather than off, which trades a little black level for a smaller halo. On an emissive panel there is nothing to tune, because there is no backlight to spill.
Questions people actually ask
What is blooming?
Light spilling from a bright area of the image into the dark area around it. On a backlit display it happens because the backlight is divided into zones that are far larger than pixels, so lighting a small bright object means lighting everything in that zone.
Can this page tell me how many dimming zones I have?
No. What you can see is roughly how large a zone is, by how far the halo extends around a small bright point, and that is an impression rather than a count. No API reports backlight architecture, and nothing on this page can work it out.
Is blooming a fault?
Not on a backlit panel. It is the direct consequence of controlling light in zones larger than pixels. It becomes a problem when it is distracting on content you actually watch, most often subtitles on a dark scene or a starfield.
Does turning local dimming off help?
It removes the halo and raises the black level everywhere, which most people find worse. If the halos bother you more than raised blacks do, it is a legitimate trade, and it is usually a setting in the picture menu.
Why does the halo look worse from an angle?
Because the diffuser layers sit in front of the backlight, so light from a lit zone spreads further as your viewing angle increases. On a display with local dimming, judging blooming from off to one side exaggerates it considerably.