Free display tests that run in your browser. Nothing is uploaded.

OLED, burn-in and uniformity

Dirty screen effect test

Flat grey fields that move slowly, because a static grey hides exactly the unevenness you are looking for.

Level
The standard field for dirty screen effect.

How to run this test

  1. Turn the room lights down a little, but do not sit in the dark. Dirty screen effect shows best in a dim room, not a black one.
  2. Sit at the distance you normally watch from. Dirty screen effect is a whole-panel property and looks far worse from close up than it ever does in use.
  3. Press Go full screen and start with 50 per cent grey, which is the field the effect is named for.
  4. Turn on pan. Slow movement is what makes the blotches and streaks visible, which is exactly why they show on football pitches and ice rinks and nowhere else.
  5. Step through the other levels. Dark blotching and light-grey streaking are different problems and show at different levels.

What a problem looks like

Vertical streaks or bands down the panel
The classic dirty screen effect. Usually uneven backlight diffusion on an LCD or slight variation in the emitter layer on an OLED. It is a manufacturing tolerance rather than damage, and it is one of the most common reasons people return an otherwise healthy panel.
Blotchy patches that move as the field pans
Mura. Irregular light and dark areas that are fixed to the panel, so they appear to swim across moving content. Severity varies enormously between units of the same model, which is why this is worth checking inside a return window.
A dark band across the middle
Often the join or the pressure point in the panel stack. Press nowhere and check it again after the display has been on for half an hour, because some panels even out as they warm.
It only appears at one grey level
Normal. Uniformity is not uniform across the range: a panel can be clean at 50 per cent and blotchy at 10 per cent, or the other way round. Judge it at the levels you actually watch.
It looks much worse than in normal use
A flat grey field is the harshest possible test, and nothing you watch looks like it. If you can only see it on this page and never on real content, you have a normal panel and a very good eye.

What to do next

If the streaking is obvious from your normal seat on content you actually watch, that is a reason to exchange a panel while you can. If it only shows on this page, it is within the range every panel lives in.

Questions people actually ask

What is dirty screen effect?

Uneven brightness across a panel that only becomes obvious on large flat areas of similar colour, especially when they move. Sports coverage is the usual place people notice it: a football pitch or an ice rink panning across the screen turns the unevenness into visible streaks and patches.

Why does the field move?

Because a still grey field hides the effect. Your visual system adapts to a static image within seconds and stops registering slow variations in it. Movement defeats that adaptation, which is why the same panel can look clean on a static test and dirty during a panning shot.

Is this a fault or normal?

Every panel has some. It is a question of degree, and there is no industry threshold to point at, which is why this page does not offer a score. What matters is whether you can see it on content you actually watch, from where you actually sit. If you can, that is worth acting on inside a return window.

Is dirty screen effect the same as backlight bleed?

No. Bleed is light escaping at the edges of an LCD and shows on a black screen. Dirty screen effect is unevenness across the whole panel and shows on mid-grey. An OLED has no backlight and so no bleed, and can still have pronounced dirty screen effect.

Can it be fixed?

Not by you. Some televisions have a service-level uniformity compensation that a technician can run, and some OLEDs have a panel refresh cycle that helps with unrelated problems. Nothing in a settings menu and nothing in a browser will change the physical uniformity of the panel.