Free display tests that run in your browser. Nothing is uploaded.

By device

LCD screen test

A backlit panel fails in ways an emissive one cannot: light escaping where it should not, a black floor it can never reach, and contrast that falls away as you move.

Last updated

Before you start

  • Dim the room without blacking it out. A completely dark room exaggerates bleed and glow so much that a healthy panel looks broken.
  • Set brightness to the level you actually use. Bleed scales with backlight output, so judging at maximum tells you about a setting you never choose.
  • Give the panel twenty or thirty minutes to warm up. Liquid crystal is slower when cold, and a VA panel in a cool room will smear far worse than it really does.
  • Turn off dynamic contrast and any local dimming for the uniformity checks, then turn dimming back on for the blooming one. They test opposite things.
  • Sit straight on at your normal distance. Every LCD loses contrast off axis, and judging uniformity from an angle measures the angle instead.

The run, in order

  1. 01
    Backlight bleed test

    The first thing to check on any backlit panel, and the most common reason one goes back. Move your head as you look, because light that follows you is glow and light that stays is bleed.

  2. 02
    Black level test

    The PLUGE ladder in a dim room. An LCD makes black by blocking light it cannot fully block, so how much shadow detail survives above that floor is the useful question.

  3. 03
    Screen uniformity test

    Grey fields across the panel. Edge-lit backlights fall off with distance from the edge, and this tells you how much yours does and where.

  4. 04
    Blooming test

    Turn local dimming back on first. Bright shapes on black show how large the dimming zones are, or whether the backlight is dimming globally instead.

  5. 05
    Black smearing test

    If the panel is VA, this is where it struggles. Dark-to-dark transitions are the slowest on that panel type and the ones that matter in a night scene.

  6. 06
    Viewing angle test

    Contrast and gamma both fall off with angle on every LCD, and hardest on VA. This tells you what other people in the room are actually seeing.

  7. 07
    Pixel inversion test

    Polarity inversion is an LCD-only behaviour, and it explains an otherwise baffling flicker on spreadsheets and fine patterns.

  8. 08
    Ghosting test

    Overdrive tuning last, with the panel warm. Shortest trail with no bright halo in front of the moving object.

What matters on this hardware

Bleed against glow against clouding

Move your head. Light that follows you is IPS glow, which every IPS panel has and none is free of. Light that stays put at an edge is bleed. Soft blotches in the middle are clouding. Only the last two are worth a return.

Black is never black

An LCD blocks a backlight that stays on, so black is always some amount of grey. In a bright room this barely matters because reflections raise it anyway. In a dark room it is the difference people notice most.

VA black smearing

VA panels buy high straight-on contrast at the cost of slow dark transitions, which shows as a dark trail behind objects on dark backgrounds. It improves as the panel warms and overdrive reduces it without removing it.

Blooming from zoned dimming

A backlight divided into zones lights whole zones to show a small bright object. Subtitles on a dark scene are where you see it. More zones means a smaller halo, and the halo size is the only clue you get about how many there are.

Viewing angle falloff

TN worst, VA weak, IPS best of the three. On a large panel at desk distance the corners are already at a noticeable angle from a centred seat, which is why viewing angle and uniformity are hard to separate.

Pixel inversion flicker

An LCD reverses polarity every frame to protect the liquid crystal, and certain fine repeating patterns line up with that. It is a normal side effect that real content almost never triggers, and it explains flicker on gridlines and small tables.

Questions people actually ask

How much backlight bleed is normal?

Some is normal on every edge-lit panel, and there is no industry threshold to point at, which cuts both ways. The practical standard is whether you can see it on dark content at your normal brightness from your normal seat. If you have to hunt for it in a pitch-black room, it will not bother you in use.

Is IPS glow a defect I can return a monitor for?

No, and no unit is free of it. It is light from the panel structure escaping at an angle, inherent to the technology. The test is whether it moves with your head: glow follows you, bleed does not.

Should I buy IPS or VA?

IPS for viewing angles, colour consistency and fast dark transitions. VA for much higher straight-on contrast and better black in a dark room, at the cost of smearing and worse angles. This site cannot decide it for you, and running the motion and angle tests on both is a better basis than a forum argument.

Does local dimming make an LCD as good as an OLED?

It closes the gap in mixed scenes and does not close it entirely, because the zones are far larger than pixels. The blooming test shows the difference directly: an emissive panel has no halo at all, and a zoned backlight always has some.

Why does my LCD look worse in a dark room?

Because a dark room removes the reflections that were masking the black floor. The panel has not changed; your reference has. That is also why lowering brightness for dark-room viewing genuinely helps, since the floor drops with the backlight.