Guide
Backlight bleed, IPS glow and clouding
On a dark screen these three get confused constantly, and only one of them is worth returning a display over. Telling them apart takes about ten seconds.
Last updated
The difference in one move
Move your head. Light that follows you as you move is IPS glow. Light that stays exactly where it is is backlight bleed.
IPS glow is inherent to the panel technology. It is light from the panel structure escaping at an angle, it appears in the corners, and it is present on every IPS display ever made. It is not a fault and no unit is free of it.
Backlight bleed is light escaping past the edges of the LCD layer, usually because of uneven pressure in the panel stack. It shows as bright patches or streaks fixed to one part of the edge.
Clouding is the same idea in the middle of the panel rather than at the edges: soft blotches, often from pressure during manufacture or transport.
How to judge it fairly
Dim the room, do not black it out. A completely dark room exaggerates all three so much that healthy panels look broken.
Set brightness to the level you actually use. Bleed scales with backlight output, so judging at maximum tells you about a setting you never use.
Sit at your normal distance and look at the whole panel rather than hunting corner by corner. If you have to search for it, it will not bother you in use.
Photographs exaggerate all three, because a camera exposing for a black screen brightens everything. A photograph is useful as evidence and misleading as a judgement.
What to do about it
Glow: nothing. It is the technology. A VA panel has less of it and worse viewing angles in other ways.
Bleed: return it if it is visible on dark content at your normal brightness from your normal seat. There is no industry threshold, which cuts both ways, so your own eyes on real content are the standard that matters.
Clouding: the same test. Some panels improve slightly over the first few weeks as the stack settles, and many do not.
The tools for this
- Backlight bleed test Black field plus the bleed, glow and clouding distinction most sites skip.
- Black screen Pure #000000, for bleed, glow, dust and OLED black level.
- True black test Pure black against the first steps above it, in a dark room.
- Screen uniformity test Flat grey at any level, with a zone grid for describing what you find.
Questions people actually ask
Does backlight bleed get worse over time?
It can change as the panel settles or as heat cycles it, and it does not usually get dramatically worse. A sudden change is worth investigating, because it can mean the panel has been knocked or the frame has been stressed.
Can I fix bleed by pressing on the bezel?
This advice circulates and occasionally redistributes pressure enough to change the pattern. It also risks permanent damage to the panel, and the change is often temporary. A warranty claim is the better route.
Do OLED displays have bleed or glow?
Neither, because there is no backlight to escape and no liquid crystal layer to leak at an angle. An OLED can still show near-black uniformity problems, which look different and are checked with grey fields rather than black ones.