Guide
OLED and LCD, and which faults belong to each
Most arguments about panel technology are really arguments about which compromises you mind. The faults are different, not fewer.
Last updated
How they make an image
An LCD has a backlight that is always on. Liquid crystal twists to block or pass that light per pixel, and colour filters make it red, green or blue. Black is made by blocking, which is never perfect.
An OLED has no backlight. Each pixel emits its own light and switches off completely for black. That single difference explains most of what follows.
Local dimming sits in between: an LCD backlight divided into zones that dim independently. More zones means better black in mixed scenes and a smaller halo around bright objects.
What each is good at
OLED: black that disappears in a dark room, no backlight bleed, no clouding, no blooming, wide viewing angles, and very fast pixel transitions.
LCD: higher sustained full-screen brightness, no burn-in risk, usually cheaper, and no near-black tinting or gamma oddities at very low levels.
Neither wins outright. In a bright room the LCD advantage in brightness matters more than the OLED advantage in black, and in a dark room the reverse is dramatically true.
Which faults belong to which
Backlight bleed, IPS glow, clouding and blooming are LCD problems. An OLED cannot have them because there is nothing to leak or bloom.
Burn-in and near-black uniformity problems are OLED problems. An LCD does not wear unevenly in the same way.
Dirty screen effect, dead pixels and dead touch zones happen on both.
Black smearing is mostly a VA LCD problem. IPS panels and OLEDs rarely show it.
About burn-in
It is permanent uneven wear, not a stuck image. Pixels that have been driven harder for longer emit less light, and the pattern that wore them shows on flat fields.
Static elements are the risk: channel logos, news tickers, game heads-up displays, phone status bars and taskbars. Varied content is the best protection there is.
Modern panels shift pixels slightly and run compensation cycles automatically. Those help and do not make burn-in impossible.
Temporary image retention is different and fades within minutes. If a ghost is still there after ten minutes of other content, it is the permanent kind.
The tools for this
- True black test Pure black against the first steps above it, in a dark room.
- OLED burn-in test The fields that make retained images and uneven wear visible.
- Backlight bleed test Black field plus the bleed, glow and clouding distinction most sites skip.
- Screen uniformity test Flat grey at any level, with a zone grid for describing what you find.
Questions people actually ask
Can a browser tell me which panel I have?
No. Panel technology is not exposed to the web at all. A black that vanishes into a dark room is strong evidence of an emissive panel, and that is an inference rather than a detection. The specification sheet is the reliable source.
Should I avoid OLED for desktop work?
It depends on your usage. A taskbar and window frames in the same place for eight hours a day is exactly the pattern that wears unevenly. Panels have improved and the risk has not vanished, so hiding static elements and varying content still matters.
Is mini-LED the same as OLED?
No. Mini-LED is an LCD with a backlight made of many small zones, so it gets closer to OLED black in mixed scenes while keeping LCD brightness and no burn-in risk. It still blooms around bright objects on black, because the zones are larger than pixels.