Free display tests that run in your browser. Nothing is uploaded.

Guide

Checking a second-hand display before you buy

A private sale has no return window, so the order changes: find the expensive faults first, and find them before you hand anything over.

Last updated

Before you go

Make sure the display will be plugged in and warmed up when you arrive. A panel switched on as you walk through the door is a cold panel, and a cold panel hides motion faults.

Take your own cable and, if you can, your own laptop. A seller cable that only works at 60 Hz turns into an argument about whether the monitor is at fault.

Save this site once before you go. It works with no network connection after the first visit, which matters in a flat with no guest wifi.

The ten-minute run

Dead and stuck pixels, on white and black first, then the primaries. Thirty seconds and it is binary.

Burn-in if it is an OLED, on a flat mid-grey field. Look for taskbars, logos and game interface outlines. This is the fault that should end the conversation.

Backlight bleed and uniformity in the dimmest light available. Ask to turn a light off rather than testing in daylight.

Refresh rate, measured rather than assumed. Panels are sometimes advertised at a rate they only reach over a specific connection.

Touch, if it has it, with the grid and the drawing test. A repaired digitiser with dead strips is common on second-hand tablets.

A few minutes of moving content for ghosting and smearing, now that the panel is warm.

What should end the conversation

Visible OLED burn-in. It is permanent, it gets worse, and nothing you do will reverse it.

Dead touch zones on a device you bought for touch.

Obvious dirty screen effect, unless the price already reflects it.

A refresh rate that will not reach what was advertised over a cable you brought yourself.

Any sign of liquid ingress, a cracked panel behind the glass, or a repair that was clearly not done by the manufacturer.

What is negotiable

A single dead pixel on a large panel, if you cannot see it on real content.

Some bleed or glow, which every backlit panel has.

Light cosmetic wear on the chassis and stand, which has nothing to do with the picture.

A missing stand or cable, as long as you know what replacing it costs before you agree a price.

The tools for this

Questions people actually ask

How can I test without wifi at the seller flat?

Load this site once on your phone or laptop beforehand. A service worker keeps the whole toolset working with no network connection at all, so every test still runs. That is exactly the situation it was built for.

Is buying a used OLED a bad idea?

Not necessarily, and burn-in is the risk that makes it different from buying a used LCD. Check a flat grey field carefully, ask how it was used, and treat heavy use with static content as a reason to walk away or pay much less.

What about panel hours?

Some monitors and televisions report usage hours in a service menu, and many do not. Where it is available it is useful context rather than a verdict, because how a panel was used matters more than how long.