Free display tests that run in your browser. Nothing is uploaded.

Guide

Keeping a phone screen healthy

A phone screen is handled more than any other display you own, which changes both what goes wrong and what you can do about it.

Last updated

The habits that matter

Lower the brightness. It is the single largest factor in how fast an OLED wears, and most people run phones brighter than the room requires.

Turn off the always-on display if you have an OLED and keep the phone for years. It holds the same elements in the same pixels continuously.

Use gesture navigation or auto-hiding bars, which removes the most common permanently static elements.

Clean with a dry microfibre cloth. Household cleaners attack oleophobic coatings, and once that coating is gone fingerprints get much worse.

After a screen repair

Run the touch grid first. A digitiser that is slightly misaligned or poorly seated loses contact in strips, usually near an edge, and that is the most common repair fault.

Check simultaneous contacts. A replacement panel that tracks fewer fingers than the original is a sign of a lower-grade part.

Check colour and brightness against a photograph you took before, if you have one. Third-party panels often differ noticeably in white point.

Check for dead pixels and uniformity on flat fields. A refurbished panel can arrive with faults the original did not have.

Panel or software

A fault that survives a restart, appears on every app, and stays in the same physical place is the panel.

A fault that moves with the interface, changes with the app, or disappears after a restart is software.

Green or pink tint at very low brightness on an OLED is a panel characteristic rather than damage. It is more visible in a dark room than anywhere else.

Flickering at low brightness is usually pulse-width modulation dimming, which is how most OLED phones dim, and some offer a high-frequency option in the display settings.

The tools for this

Questions people actually ask

Do screen protectors affect touch accuracy?

A well-fitted one usually does not. A thick or poorly fitted one, or one with trapped air, can reduce sensitivity in patches. If touch problems started when you fitted a protector, remove it and run the grid again before blaming the phone.

Is it worth replacing a phone screen with a third-party part?

It depends on what you are replacing. Third-party panels vary a lot in colour, brightness and touch quality, and some lose features tied to the original part. Checking the replacement against these tests immediately, while a repair is still disputable, is the useful step.

Why does my phone screen look different from my friend’s identical phone?

Panel variation between units is normal, and so is different calibration between production batches. Display settings, adaptive colour modes and night filters account for most of the rest.