Free display tests that run in your browser. Nothing is uploaded.

Input and geometry

Screen size calculator

Give it a diagonal and a resolution and it gives you the picture width, height, pixels per inch and pixel pitch.

— pixels per inch
Picture width
—
Picture height
—
Pixel pitch
—
Diagonal in pixels
—
Aspect ratio
—
Total pixels
—

Width and height are the visible picture. Bezels and stands are not included, because they are not derivable from a diagonal.

How to use this calculator

  1. Enter the diagonal. Use the advertised size, or measure corner to corner across the visible picture, not the bezel.
  2. Enter the resolution, or press Use this screen to fill in what your browser reports for the display you are on.
  3. Read the width and height. Those are the picture dimensions, which is what you need for a desk, a shelf or a wall mount.
  4. Check the pixels per inch against the viewing distance you actually use. A number that is fine on a desk can be coarse on a laptop and irrelevant on a television.

What a problem looks like

The width does not match the box the monitor came in
Packaging usually quotes the outside of the chassis including the bezel and sometimes the stand. This works from the diagonal of the picture, so it gives you the picture. Add a centimetre or two each side for the frame before you measure a shelf.
Your diagonal measurement disagrees with the advertised size
Advertised sizes are rounded, and some are rounded generously. A panel sold as 27 inches is often 26.9 or 27.1. Half an inch of difference is normal; two inches is not, and is worth querying with the seller.
The PPI looks low for a screen that looks sharp
Pixels per inch only means something next to a viewing distance. A 50-inch television at 3840 by 2160 is about 88 PPI and looks perfectly sharp from a sofa. The same density at arm’s length on a monitor would show its structure.
You are calculating for a curved screen
A curved panel is measured along the curve by most manufacturers, so the flat width you can actually fit on a desk is slightly less than the figure here. Treat the result as an upper bound and check the manufacturer specification sheet for the depth.

What to do next

If you are sizing a desk or a mount, add the bezel and stand depth from the manufacturer specification sheet to the picture dimensions here. If you are comparing two panels, compare pixels per inch at the distance you will actually sit.

Questions people actually ask

Why do I have to type the diagonal in?

Because no web page can find it out. Physical dimensions are not exposed to JavaScript in any browser: a 24-inch and a 27-inch 1080p monitor are indistinguishable to a web page. Any site that claims to detect your screen size is inferring it from your resolution, which is a guess dressed up as a measurement.

Should I use the advertised size or measure it myself?

Measure it if the number matters. Advertised diagonals are rounded, and on phones the figure usually includes the corners cut away by the rounded shape, so the usable picture is a little smaller than the number on the box.

What is pixel pitch and when does it matter?

It is the width of one pixel in millimetres, which is just pixels per inch expressed the other way round. It matters when you are comparing panels for text work, and when you are working out how close you can sit to a large display before the pixel structure becomes visible.

Does this work for a phone or a projector?

For a phone, yes, though the rounded corners make the measured diagonal slightly generous. For a projector it is not the right tool: the image size depends on throw distance and lens, and the panel resolution stays fixed however big you make the picture.

Is the figure exact?

It is exactly as good as the diagonal you give it. The arithmetic is simple geometry with no approximation: the pixel diagonal divided by your inches gives pixels per inch, and the rest follows. A diagonal that is a quarter of an inch out moves the pixels per inch by about one per cent.