Free display tests that run in your browser. Nothing is uploaded.

Pixels and solid colour

Cyan screen

A full screen of pure cyan, driving green and blue to maximum while the red sub-pixel stays completely off.

100%
Download as PNG

What a cyan screen is for

The complement that finds a failed red element

Cyan is what you get when red is absent and the other two primaries are at full strength, which makes it the exact opposite of a red field. On red, a working red element glows and a failed one is a black dot. On cyan the logic reverses: the red element should be emitting nothing at all, so any pixel showing a reddish or pale point is a red element that is stuck on rather than dead. Running red and cyan one after the other checks the same sub-pixel from both directions, which catches faults that a single field can miss.

Why a bright secondary shows dirt so well

Cyan is one of the brightest fields a display can produce, because two of the three primaries are at maximum and the eye is particularly sensitive to the green component. That brightness is unhelpful for judging black level and extremely helpful for finding surface contamination. Dust, smears and dried droplets that vanish into a white field stand out against cyan because the colour behind them is saturated rather than neutral, so the grey of the dirt has something to contrast with.

Checking the blue channel at full output

Blue is the dimmest of the three primaries and the hardest to judge on its own, because a blue field gives the eye very little to work with. Cyan raises blue to maximum alongside green, which makes banding, blotching and tint variation in the blue channel far easier to see than a pure blue field does. If cyan looks uneven while green looks clean, the unevenness is coming from blue.

A quick check for colour management

Fully saturated cyan sits near the edge of what sRGB can express, so it is a useful field for spotting a display that is stretching sRGB content across a wider gamut. On a well managed wide-gamut screen this field looks like a strong cyan. On an unmanaged one it often looks electric and slightly green, which is the display exaggerating rather than reproducing.

How to run this test

  1. Go full screen and look for reddish or pale points, which are red elements stuck on.
  2. Run the red screen straight afterwards. Between them the red sub-pixel is checked in both directions.
  3. Check the field for uneven brightness, then compare against green and blue separately to find which channel causes it.
  4. If the cyan looks electric or greenish, check whether your display is stretching sRGB across a wider gamut.

What a problem looks like

Reddish or pale dots on cyan
A red sub-pixel that is stuck on rather than dead. It will look normal on a red field and wrong here, which is why running both is worth the extra ten seconds.
Uneven brightness across the field
Cyan combines two primaries, so unevenness here can come from either one. Compare against the green and blue fields separately to find out which channel is responsible.
A green cast rather than a clean cyan
Usually a wide-gamut display showing sRGB content without colour management, or a picture mode pushing saturation. Try the standard or sRGB preset before treating it as a fault.

What to do next

If something looks wrong, check it again in a normally lit room and from straight on, then check whether it appears on a second device. If it only happens on this screen and you are still inside the return window, that is the time to contact the retailer.

Questions people actually ask

What is the point of cyan if I have already run red?

They test the red sub-pixel from opposite directions. Red finds elements that fail to light; cyan finds elements that fail to switch off. A stuck-on red sub-pixel is invisible on a red field and obvious on cyan.

Is cyan the same as turquoise or aqua?

In everyday speech they overlap. In sRGB, cyan is exactly 0, 255, 255, and aqua is the same colour under a different name in the CSS colour list. Turquoise is a different value with more green than blue, so it is not the field you want for a sub-pixel check.

Why does cyan look so much brighter than blue?

Because green contributes most of the brightness your eye perceives and blue contributes very little. Adding green at full output to blue at full output roughly multiplies the apparent brightness, which is why a cyan field is uncomfortable at high display brightness and a blue one is not.