Magenta screen
A full screen of pure magenta, driving red and blue to maximum while the green sub-pixel stays completely off.
Esc to exit · arrow keys to change · H hides the controls
Dimming changes what is sent to the panel, so this is no longer an exact colour value. Return the slider to 100% before judging anything.
What a magenta screen is for
Finding a green element that will not switch off
Magenta is red and blue at full strength with green absent, which makes it the exact complement of a green field. Green is the primary that contributes most of the brightness a display produces, so a green element stuck partly on is unusually easy to spot here: it shows as a pale or whitish point against a field that should be entirely free of green. The same fault on a green screen looks like nothing at all, because the element is doing what the field asks of it.
Why magenta is the harshest field for tint
There is no single wavelength that produces magenta. Your visual system constructs it from the red and blue ends of the spectrum with nothing in between, which is why it has no place on a rainbow. That construction makes it unusually sensitive to small errors: a display with a slight green leak anywhere in its signal chain produces a magenta that looks muddy or greyish rather than vivid, and that is far easier to see here than on any primary.
Checking the extremes of the panel together
Red and blue sit at opposite ends of the visible range, and many panels handle them differently. Driving both to maximum at once with green off is a stress case that combines the two channels most likely to show banding and uneven response. If magenta shows blotches that neither red nor blue shows alone, the interaction between them is where to look.
Spotting a failing connection
A damaged cable or a marginal connector often loses one channel before the others, and a magenta field makes the green channel absence unmistakable because green is supposed to be absent already. Run green immediately afterwards: if green is dim or missing entirely while magenta looks correct, the fault is in the signal rather than the panel.
How to run this test
- Go full screen and look for pale or whitish points, which are green elements stuck on.
- Run the green screen next, so the green sub-pixel is checked from both directions.
- A muddy or greyish magenta means green is leaking in. Check the picture mode and the cable.
- Look for banding, which on this field usually points at the signal chain rather than the panel.
What a problem looks like
- Pale or white dots on magenta
- A green sub-pixel stuck on. It is invisible on a green field and unmistakable here, which is the entire reason this page exists.
- A muddy or greyish magenta
- Green is leaking into the field somewhere. Check the picture mode and any colour enhancement setting, then the cable, before concluding anything about the panel.
- Dark dots that also appear on red and blue
- Two failed sub-pixels in the same pixel, or a fully dead pixel. Confirm on white: a pixel that is black on white as well is dead rather than partially stuck.
What to do next
If something looks wrong, check it again in a normally lit room and from straight on, then check whether it appears on a second device. If it only happens on this screen and you are still inside the return window, that is the time to contact the retailer.
Questions people actually ask
Why is magenta not on the rainbow?
Because no single wavelength of light looks magenta. It is what your visual system produces when the red and blue receptors are stimulated together without the green one, so it exists in perception rather than in the spectrum. That is a curiosity rather than a problem, and it is also why the field is so sensitive to green leaking in.
Is magenta the same as pink or fuchsia?
Fuchsia is the same value in the CSS colour list, 255, 0, 255. Pink is a lighter, less saturated colour with all three channels lit, which makes it useless for a sub-pixel check because green is no longer switched off.
My display shows magenta with visible banding. What does that mean?
Two channels at maximum with one absent is a demanding field, and banding here usually points at the signal chain rather than the panel. Check the colour format and any range setting, then compare with the gradient test, which is built to separate banding from clipping.