Free display tests that run in your browser. Nothing is uploaded.

Colour and tone

RGB channel test

Each channel driven on its own, then in pairs, then together, which is the fastest way to work out which one is causing a problem.

Field
View
Red at maximum, green and blue completely off.

How to run this test

  1. Press Go full screen and step through the three single channels first.
  2. Compare their apparent brightness. Green should look far brighter than red, and red far brighter than blue. That is how your eye works, not a fault.
  3. Move on to the pairs. Red plus green must look like a clean yellow, green plus blue like a clean cyan, red plus blue like a clean magenta.
  4. Switch to Ramps and look along each channel for banding or a step that arrives early, which points at that channel rather than the panel as a whole.
  5. Finish on all three. A cast on white after the pairs looked clean means the three channels are individually fine and their balance is not.

What a problem looks like

One primary looks dim compared with the others
Judge this carefully, because the three are not meant to look equally bright. Green contributes most of perceived brightness, red much less and blue least of all. A channel that looks wrong relative to that expected order, rather than simply darker, is the one worth investigating.
A pair does not look like the colour it should
Yellow leaning orange means green is weak. Cyan leaning blue means green is weak again. Magenta looking muddy means green is leaking in where it should be absent. Green is involved in most of these because it carries the most light.
Black dots on one primary only
A failed sub-pixel in that channel. It will be invisible on white, because the other two still light, which is exactly why running the channels separately finds things a white field cannot.
Banding on one channel and not the others
Usually the signal chain rather than the panel. Check the colour format setting, any RGB range option and the cable before concluding anything about the display.
The pairs look clean but white has a cast
A white balance problem rather than a channel problem. The three channels work and their relative gains are off. That is what the RGB gain controls in a display menu exist to correct.

What to do next

Once you know which channel is involved, the individual colour page for it explains what that channel shows and why. If the pairs are clean and only white has a cast, the RGB gain controls in your display menu are the thing to adjust.

Questions people actually ask

Why check the channels separately?

Because a white field lights all three sub-pixels, so a failure in any one of them only slightly tints the pixel and is easy to miss. Driving one channel at a time removes the other two entirely, which turns a subtle tint into an unmistakable black dot or a visibly wrong colour.

Should the three primaries look equally bright?

No, and a display where they did would be wrong. Human vision weights green most heavily, red next and blue least, which is why the standard luminance formula gives green about 72 per cent of the weight and blue about 7. Green looking far brighter than blue is the correct result.

Can this tell me if one channel is weaker than it should be?

Not as a number. Nothing in a browser measures the light coming off your panel, so there is no per-channel output figure to report. What the page does is send exact values and tell you what a healthy result looks like, which leaves the judging to you.

What is additive mixing and why does it matter here?

Displays make colour by adding light, so red plus green makes yellow, green plus blue makes cyan and red plus blue makes magenta. That is the opposite of mixing paint. Checking the pairs tests two channels at once against a result you can predict exactly, which catches errors that a single channel on its own would hide.

How is this different from the individual colour pages?

The colour pages give you one field each with the reasoning behind that particular colour. This puts all seven combinations in one place with ramps, so you can step between them quickly and compare. Use this to find which channel is involved, then the individual page to study it.